Textured Diffusion Lenses

S-Series for beam angle management

Textured Diffusion Lenses

S-Series lenses can replace textured diffusers such as Solite™ and Industrex™ glass lenses, retaining their iconic textured appearance in a convenient and cost-effective plastic diffuser. They are typically used to soften or diffuse downlights, spot lights, and flood lights that require light to moderate diffusion. S-Series are available in a wide range of thicknesses and materials per the table below.

Also see M-Series (non-textured) Beam Mixing Diffusers from Bright View.

Product Description Use for light with angles on the range of 1 Efficiency in typical LED luminaire 2
S-SC06 Narrow (6°) softening / diffusing lens similar to Solite™ glass 5° to > 30° 90 - 96 %
S-SH12 Narrow (12°) softening / diffusing lens with Solite™-like texture 10° to > 40° 90 - 96 %
See also: M-Series Smooth Beam Mixing Diffusers


Each product is available in the following materials and thicknesses:
Acrylic (PMMA) 1.5, 2, 3, 4, 6 mm 0.060, 0.080, 0.120, 0.150, 0.240 in
Polycarbonate 0.25, 0.5, 0.75, 1.5, 3 mm 0.010, 0.020, 0.030, 0.060, 0.120 in
PET 0.075, 0.125 (UV), 0.175 mm 0.003, 0.005 (UV), 0.007 in

Solite™ and Industrex™ are trademarks owned by AGC Flat Glass North America, Inc.

Usage Notes:

    • S-Series lenses can be used with the textured surface facing either in or out.

1 Angles data are typical; they vary greatly depending on luminaire design.
2 Efficiencies are typical; they vary greatly depending on luminaire design. Bright View tests include: commercial 4-inch LED downlight module, linear LED fluorescent tube-replacement, 2’x2’ LED troffer with clear acrylic cover